45 MP full-frame camera for professional photogrammetry. Mechanical shutter, interchangeable lenses and Smart Oblique Capture. For orthomosaics and detailed 3D models.
DJI Zenmuse P1 — a full-frame camera for high-accuracy surveying of land, construction sites and quarries.
The 45 MP full-frame sensor and mechanical shutter up to 1/2000 s deliver sharp, distortion-free images, while a photo interval from 0.7 s speeds up work. The stabilized gimbal and data synchronization ensure accurate spatial reconstruction.
Interchangeable DL 24, 35 and 50 mm lenses and Smart Oblique Capture mode let you tailor the survey to the task. Processing is done in DJI Terra. Suitable for surveying and construction companies and mining enterprises.
Horizontal: 3 cm, Vertical: 5 cm * * Using Mapping Mission at a GSD of 3 cm and flight speed of 15 m/s, with an 75% front overlap rate and a 55% side overlap rate.
Camera
Sensor
Sensor size (Still): 35.9×24 mm (Full frame) Sensor size (Max video recording area): 34×19 mm Effective Pixels: 45MP Pixel size: 4.4 μm
Supported Lenses
DJI DL 24mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 84° DJI DL 35mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 63.5° DJI DL 50mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 46.8°
Supported SD Cards
SD: UHS-I rating or above; Max capacity: 512 GB
Storage Files
Photo / GNSS Raw Observation Data/ Image Log File
Photo Size
3:2 (8192×5460)
Operation Modes
Photo, Video, Playback
Minimum photo interval
0.7 s
Shutter Speed
Mechanical Shutter Speed: 1/2000*-1 s Electronic Shutter Speed: 1/8000-1 s *Aperature value no larger than f/5.6
Tilt: -130° to +40°; Roll: -55° to +55°; Pan: ±320°
Specifications are based on official DJI data (enterprise.dji.com/zenmuse-p1/specs). Actual values may vary depending on operating conditions and firmware version.
