Spotlight for Matrice enterprise drones. Illumination distance up to 500 m, Low Beam, High Beam and Both On modes. Beam direction synchronized with the camera for night inspection and search.
DJI Zenmuse S1 — a spotlight for illuminating the work area at night during inspection, surveillance and search and rescue operations.
Low Beam, High Beam and Both On modes let you match the beam to the distance to the target. Illumination distance reaches 500 m, and illuminance up to 40 lux at 100 m with Matrice 400 under DJI test conditions.
The beam is pointed in sync with the camera via a controllable gimbal, and a strobe mode is available. IP54 protection allows operation in harsh conditions.
Key features
Range up to 500 m — illuminates distant objects.
Low Beam, High Beam and Both On — beam matched to the task.
Up to 40 lux at 100 m — with Matrice 400 under DJI test conditions.
Strobe mode — to attract attention.
Camera synchronization — the light follows the gimbal.
<50° C (122° F, plastic shell)Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.
Ingress Protection Rating
IP54Under controlled laboratory conditions, it can achieve an IP54 protection rating by IEC60529 standards. The IP rating is not permanently effective and may decrease due to product wear and tear.
Environment
Operating Temperature
-20° to 40° C (-4° to 104° F)
Storage Temperature
-20° to 60° C (-4° to 140° F)
Gimbal
Stabilization System
3-axis (tilt, roll, pan)
Angular Vibration Range
Hover: ±0.01° Flight: ±0.02°
Mounting
Detachable DJI SKYPORT
Mechanical Range
Tilt: -129° to +73° Roll: ±55.8° Pan: ±327°Structural limit, not controllable range.
Controllable Range
Tilt: -120° to +60° Pan: ±320°
Operation Mode
Follow / Free / Re-center
Illuminance
Maximum Central Illuminance
40 lux @ 100 m (Matrice 400, Both On mode) 35 lux @ 100 m (Matrice 300 RTK/Matrice 350 RTK, Both On mode)Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.
Low Beam Central Illuminance
20 lux @ 100 m (Matrice 400, Low Beam mode) 13 lux @ 100 m (Matrice 300 RTK/Matrice 350 RTK, Low Beam mode)Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.
High Beam Central Illuminance
30 lux @100 m (High Beam mode)Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft
Effective Illumination Angle
15±1° (10% relative illuminance, Low Beam mode and Both On mode) 4±0.5° (10% relative illuminance, High Beam mode)
Typical Color Temperature
6500K typical value (Low Beam mode) 7500K typical value (High Beam mode)Measured in a laboratory environment at an ambient temperature of 25° C (77° F) using an integrating sphere. Actual results may vary slightly due to different experimental conditions, and the final effect is subject to actual use.
Dimming Mode
Analog dimming
Effective Illumination Distance
500 m (Both On mode)Measured in a laboratory environment at an ambient temperature of 25° C (77° F). Actual conditions may vary slightly due to specific environmental humidity, weather conditions, and other factors. The final effect is subject to actual use.
Basic Features
Lighting Control
Turning light on/off, brightness adjustment
Strobe Mode
5 Hz strobe
Lighting Mode
Low Beam mode, High Beam mode, Both On mode
Remote Controller Buttons
Can be set for turning the light on/off, brightness adjustment, or lighting mode changes
Gimbal Synchronization
Supports synchronized control with other gimbal-equipped payloads
Special Features
Eye Protection
Automatically limits brightness to 40% when not in flight
Payload Protection
LED, LEP temperature protection, overcurrent protection, and power protection to prevent damage.
Synchronized Control
When two Zenmuse S1 are mounted on Matrice 400, both spotlights can be controlled at the same time.
Intelligent Beam Alignment
When used with the Zenmuse H30 Series on Matrice 400, Zenmuse S1 employs gimbal synchronization to automatically align the spotlight beam with the camera view.
Specifications are based on official DJI data (enterprise.dji.com/zenmuse-s1/specs). Actual values may vary depending on operating conditions and firmware version.
