Onboard computing module for data processing and AI applications in flight. Up to 100 TOPS of computing power, GPU and DLA for algorithm acceleration. For specialized inspection and monitoring solutions.
DJI Manifold 3 — an onboard computing module that runs compatible applications directly on board the drone.
Up to 100 TOPS of computing power, a GPU and a DLA accelerator process video and sensor data in real time, without transmitting it to the ground. PSDK and CUDA are supported.
The module is designed for integrators and enterprises that deploy their own object detection and data analysis algorithms or install compatible third-party applications.
DJI Matrice 400 DJI Matrice 4 Series DJI Matrice 4D Series
Memory
16GB LPDDR5
Storage
256GB SSD
Computing Power
Up to 100 TOPS** Measured using the INT8 computation precision standard, based on a sparse computing model.
Interface
E-Port Interface: Supports DJI Matrice 400 E-Port V2 interface USB-C Interface: USB 3.2 Gen 1 protocol, with transfer rates up to 5 Gbps* On Matrice 400, Manifold 3 only supports the E1, E2, and E3 ports of the E-Port V2, with E3 being the recommended option.
Environmental Parameters
Operating Temperature
-20° to 50° C (-4° to 122° F)
Storage Temperature
-20° to 60° C (-4° to 140° F)
Ingress Protection Rating
IP55Measured under controlled conditions. The rating is not permanently effective and may decrease due to product wear and tear.
Power Supply
E-Port Power Supply
Matrice 400 E-Port V2: 24V Input
USB Power Delivery (PD)
You can use a power adapter that supports the PD protocol to supply power via the USB-C interface.Please refer to the FAQ for recommended power adapter models.
Specifications are based on official DJI data (enterprise.dji.com/manifold-3/specs). Actual values may vary depending on operating conditions and firmware version.
